About Tektronix oscilloscopes Options
DPO/DSA70000C/D, and MSO70000C:
Calibration:
Opt. C3 - Calibration service 3 yea
rs
Opt. C5 - Calibration service 5 years
Opt. D1 - Calibration data report
Opt. D3 - Calibration data report 3 years (with Opt C3)
Opt. D5 - Calibration data report 5 years (with Opt C5)
Hardware:
Opt. 1R - Rackmount kit
Record Length:
DPO70000C/D, DSA70000C/D, and MSO70000C Series:
Opt. 2XL - 31 MSamples/ch
Opt. 5XL - 62 MSamples/ch
Opt. 10XL - 125 MSamples/ch
Opt. 20XL - 250 MSamples/ch
Opt. 30XL - 500 MSamples/ch
Service:
Opt. CA1 - Provides single calibration event for the designated interval
Opt. R3 - Repair service 3 years (including warranty)
Opt. R5 - Repair service 5 years (including warranty)
Software:
DPO70000C/D, DSA70000C/D, and MSO70000C Series:
Opt. DDRA - DDR Memory Bus Analysis
Opt. DJA - Advanced Jitter and Eye Analysis
Opt. D - PHY MIPI D -PHY Transmitter Debug, Characterization, and Compliance Test
Solution (requires DJA)
Opt. DSPT - DisplayPort Transmitter Compliance Test (for 8 GHz o r faster models)
Opt. DVI - DVI Compliance Test
Opt. ERRDT - Frame and Bit Error Rate Detector in high speed serial standards (requires
option ST6G).
Opt. ET3 - Ethernet Compliance Test
Opt. HT3 - HDMI Compliance Test
DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series 13
To Next Page
Loading...
Need help?
General
