Tektronix DSA70000/B Series User Manual

Compliance Info
rmation
Pollution Degree
Pollution Degree 2 (as defined in IEC 61010-1). Note: Rated for indoor use only.
Installation (Overvoltage) Category Descriptions
Terminals on this product may have different installation (overvoltage) category designations. The installation categories are:
Measurement Category IV. For measurements performed at the source of low-voltage installation.
Measurement Category III. For measurements performed in the building installation.
Measurement Category II. For m easurements performed on circuits directly connected to the low-voltage installation.
Measurement Category I. For measurements performed on circuits not directly connected to MAINS.
Overvolta
ge Category
Mains: Overvoltage Category II
Measurement inputs: Overvoltage Category I
(As defined in IEC 61010-1)
x DPO7000 Series and DPO/DSA70000/B Series Q uick Start User Manual

Tektronix DSA70000/B Series Specifications

General

Brand	Tektronix
Model	DSA70000/B Series
Category	Test Equipment
Language	English