Commands Listed in Alphabetical Order
Group
Display Contro
l
Syntax
DISplay:STYle { NORMal | INFPersis t | VARPersi st }
DISplay:STYle?
Related Commands
DISplay:PERSistence
Arguments
NORMal disable s the p ersistence mode.
INFPersist accumulates data points on the display indefinitely. The display
is reset when the style or acquisition is reset.
VARPersist leaves acquired data points on the display for a period of time
specified by the DISplay:PERSistence command.
Examples
DISPLAY:STYLE INFPERSIST sets the display to indefinitely accumu
late data
points on the screen.
DISPLAY:STYLE? might return DISPLAY:STYLE VARPERSIST,indica
ting that
the display style is set to variable persistence.
DISplay:WFMReadout
This command sets or queries state of the Waveform readout. This is equivalent to
toggling the Wa veform readout off or on with the Waveform readout icon in the
toolbar.
Group
Display Control
Syntax
DISplay:WFMReadout { ON | OF F | NR1 }
DISplay:WFMReadout?
Arguments
ON enables the readout display for the Waveform function.
OFF disables the readout display for the Waveform function.
NR1 set to 0 disa bles the Waveform readout display; any other integer enables
the Wavef orm readout display.
Examples
DISPLAY:WFMREADOUT 1 enables the Waveform readout display.
DISPLAY:WFMREADOUT? might return DISPLAY:WFMREADOUT 0, indicating that
the Waveform readout display is off.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-131
To Next Page
Loading...
