Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
MEASUrement:
MEAS<x>:MEAN? (Query Only)
This query only command returns the mean value accumulated for the
measurement slot specified by x, which c an be 1 through 8, since the last statistical
reset.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:MEAN?
Related Commands
MEASUrement:MEAS<x>:ALL?
Returns
NR3
Examples
MEASUREMENT:MEAS1:MEAN? might return ME ASUREMENT:MEAS1:MEAN
2.85516357276E-003
, indicating that the mean value for Meas 1 is 2.855 mV.
MEASUrement:MEAS<x>:MINimum? (Query Only)
This query only command returns the minimum value found for the measurement
slot specified by x, which can be 1 through 8, since the last statistical reset.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:MINim um?
Related Commands
MEASUrement:MEAS<x>:ALL?
Returns
NR3
Examples
MEASUREMENT:MEAS1:MINIMUM ? might return
MEASUREMENT:MEAS1:MINIMUM 1.92260747428E- 003, indicating that the
minimum value for Meas 1 is 1.923 mV.
MEASUrement:MEAS<x>:NOISe
This command sets or queries whether the noise measurement is made on the high
or low level of the waveform. Sending this command is equivalent to selecting
2-228 DSA/CSA/TDS8X00/B Series Programmer Manual

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English