Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
MEASUrement:
LISTValue? (Query Only)
This query only command returns the values of the measurements in the list
created with the MEASUrement:LIST command.
Group
Measurement
Syntax
MEASUrement:LISTValue?
Related Commands
MEASUrement:LIST
Examples
MEASUREMEN
T:LISTVALUE?
might return MEASUREMENT:LISTVALU E
1.52587894784E-004,2.4949 9996255E-010
, which are the mea surement
values for the measurement slots defined as part of the list.
MEASUrem
ent:MEAS<x>:ALL? (Query Only)
This query only command returns all the statistics for the measurement
specified by x, which can be 1 through 8. Before you send this command,
send the
MEASUrement:STATIstics:ENABle ON command to ensure accurate
measurement statistics. The following measurement values are returned:
Maximu
m
Minimum
Mean
Standard deviation
Measurement value
Group
Measurement
Syntax
MEASUrement:MEAS<x>:ALL?
Related Commands
MEASUrement:MEAS<x>:MAXimum?, MEASUrement:MEAS<x>:
MINimum?, MEASUrement:MEAS<x>:MEAN?, MEASUrement:MEAS<x>:
STDdev?, MEASUrement:MEAS<x>:VALue?, MEASUrement:STATIstics:
ENABle
Re
turns
NR3
2-224 DSA/CSA/TDS8X00/B Series Programmer Manual

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English