Commands Listed in Alphabetical Order
Group
Measurement
Syntax
MEASUrement:MEAS<x>:STATE {OFF | ON | <NR1>}
MEASUrement:MEAS<x>:STATE ?
Related Commands
MEASUrement:MEAS<x>:SOUrce<x>:WFM, MEASUrement:MEAS<x>:TYPe
Arguments
OFF disables the calculation and display of the measurement definedinthe
specified measurement slot.
ON enables the calculation and display of the measurement defined in the
specified measurement slot.
NR1 set to 0 disables the calculation and display of the specified mea surement
slot; any other value enables the calculation and display of the specified
measurement slot.
Examples
MEASUREMENT:MEAS1:STATE ON displays the measurement defined in
measurement slot 1.
MEASUREMENT:MEAS4:STATE? might return MEASUREMENT:MEAS4:STA TE 1,
indicating that the measurement defined for measurement slot 4 is displayed.
NOTE. A query always returns a 0 or 1.
MEASUrement:MEAS<x>:STATIstics:CLEar (No Query Form)
This command (no query form) clears and restarts the calculation of the statist
ics
for the measurement slot specified by x, which can be 1 through 8.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:STATI stics:CLEar
Related Commands
MEASUrement:STATIstics:ENABle
Examples
MEASUREMENT:MEAS3:STATIST ICS:CLEAR clears and restarts calculating the
statistics for Measurement 3.
2-252 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
