Tektronix DSA8200 Series

Commands Listed in Alphabetical Order
Related Commands
AUTOSet:TYPE
Arguments
EXECUTE autosets the currently selected waveform.
Examples
AUTOSET EXECUTE performs an autoset on the currently selected waveform.
AUTOSet:HORizontal
This command sets o r que ries whether an autoset should perform the horizontal
autoset portion when Autoset is executed.
Group
Horizontal
Syntax
AUTOSet:HORizontal { ON | OF F | 0 | 1 }
AUTOSet:HORizontal?
Related Commands
AUTOSet
Arguments
ON enables the horizontal AutoSet options.
OFF disables the horizontal AutoSet options.
0 disables the horizontal AutoSet options.
1 enables the horizontal AutoSet o ptions.
Examples
AUTOSET:HORIZONTAL ON enables the horiz ontal autoset options.
AUTOSET:HORIZONTAL? might return AUTOSET:HORIZONTAL 0, indicating that
horizontal autoset options are disabled.
AUTOSet:STOP (No Query Form)
This command (no query form) aborts an autoset that was initiated with the
AUTOSet command.
Group
Miscellaneous
Syntax
AUTOSet:STOP
DSA/CSA/TDS8X00/B Series Programmer Manual 2-67