Tektronix Keithley DMM7510 - Page 103

Section
11: Troubleshooting FAQs Model DMM7510 7½ Digit Multimeter User's Manua
l
11-4 DMM7510-900-01 Rev. C / September 2019
To verify which command set is selected from a remote interface, send the command:
*LANG?
To change to the SCPI command set from a remote interface, send the command:
*LANG SCPI
Reboot the instrument.
To change to the TSP command set from a remote interface, send the command:
*LANG TSP
Reboot the instrument.