7510 7½ Digit Multimeter User's Manual Section 2: Front-
DMM7510-900-01 Rev. C / September 2019 2-15
System menu
The menus under System in the main menu allow you to configure general instrument settings from
the DMM7510 front panel. Among these settings are the event log, communications, backlight, time,
and password settings.
The Event Log menu allows you to view and clear event log entries. You can also
adjust which events are displayed or logged.
The Communication menu opens a set of tabs that contain information about the
communications settings. Most of the tabs contain settings that you can change.
The Settings menu contains general instrument settings. It includes beeper and
key click, backlight brightness and timer, time and date, system access level,
password, and reading format settings.
The Calibration menu allows you to start or manage autocalibration.
Autocalibration removes measurement errors that are caused by the effects of
temperature and time on components. You can also review factory adjustment and
verification dates.
The Info/Manage menu gives you access to version and serial number information
and settings for instrument firmware and reset functions.
To Next Page
Loading...
Need help?
General
