Tektronix Keithley DMM7510 User Manual

Section
7: Sampling temperature at a set time interval Model DMM7510 7½ Digit Multimeter
User's Manual
7-6 DMM7510-900-01 Rev. C / September 2019
-- Initiate trigger model and wait until finished.
trigger.model.initiate()
display.changescreen(display.SCREEN_USER_SWIPE)
display.clear()
-- Display a message on the USER swipe screen to indicate test in progress.
display.settext(display.TEXT1, "Test in progress...")
waitcomplete()
-- Display a message on the user swipe screen to indicate test completion.
display.clear()
display.settext(display.TEXT1, "Test complete.")
-- Print the temperature readings and the corresponding timestamps.
printbuffer(1,defbuffer1.n, defbuffer1)
printbuffer(1,defbuffer1.n, defbuffer1.relativetimestamps)
Test results
The following figures show a sample graph and final test measurement for this application.
Figure 32: Model DMM7510 graph of temperature measurements
Figure 33: Model DMM7510 final temperature measurement

Tektronix Keithley DMM7510 Specifications

General

Brand	Tektronix
Model	Keithley DMM7510
Category	Multimeter
Language	English