Commands Listed in Alphabetical Order
Group
Bus
Syntax
BUS:B<x>:ETHERnet:SOUrce:DPLUs {CH1|CH2|CH3|CH4 |D0|D1|D2|D3|
D4|D5|D6|D7|D8|D9|D10|D11|D12|D13|D14| D15}
BUS:B<x>:ETHERnet:SOUrce:DPLUs?
Related Commands
BUS:B<x>:ETHERnet:PRObe
BUS:B<x>:ETHERnet:SOUrce:DMINus
Arguments
CH1–4 specifies to use one of the analog channels 1–4 as the Ethernet data source
for the D+ input.
D0–D15 specifies to use one of the digital channels D0 — D15 as the Ethernet
data source for the D+ input. (MSO/MDO4000/B models only as well as
MDO3000 and MDO400C models with option MDO3MSO or MDO4MSO
installed.)
Examples
BUS:B1:ETHERnet:SOUrce:DPLUs D5 specifies the Ethernet data source for
the D+ input as D5.
BUS:B1:ETHERnet:SOUrce:DPLUs? might return CH3, indicating that channel
3 is the Ethernet data source for the D+ input.
BUS:B<x>:ETHERnet:TYPe
This command specifies the Ethernet standard type: 10Base-T or 1
00Base-T.
The default is ENET 100 BASETX.
Conditions
This command requires a DPO4ENET application module for DPO/MSO4000B
and MDO4000/B/C models.
Group
Bus
Syntax
BUS:B<x>:ETHERnet:TYPe {ENET10BASET|ENET100BASETX}
BUS:B<x>:ETHERnet:TYPe?
Related Commands
BUS:B<x>:ETHERnet:PRObe
TRIGger:A:BUS:B<x>:ETHERnet:CONDition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:CONDition
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-177
To Next Page
Loading...
Need help?
General
