Commands Listed in Alphabetical Order
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:MIL1553B?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the MIL-STD-1553 bus feature is present.
<NR1> = 0 if the MIL-STD-1553 bus feature is not present.
CONFIGuration:BUSWAVEFORMS:NUMBUS? (Query Only)
This query returns the number of bus waveforms.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:NUMBUS?
Returns
<NR1>
CONFIGuration:BUSWAVEFORMS:PARallel? (Query Only)
This query returns a boolean value to indicate whether the parallel bus triggering
and analysis feature is present.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:PARallel?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the parallel bus feature is present.
2-248 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
