Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
<NR1> = 0 if the p
arallel bus feature is not present.
CONFIGuration:BUSWAVEFORMS:RS232C? (Query Only)
This query returns a boolean value to indicate whether the optional RS232 bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4COMP application module, or
MDO3COMP for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:RS232C?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the RS232 bus feature is present.
<NR1> = 0 if the RS232 bus feature is not present.
CONFIGuration:BUSWAVEFORMS:SPI? (Query Only)
This query returns a boolean value to indicate whether the optional SPI bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4EMBD application module, or
MDO3EMBD for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:SPI?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-249

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English