To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Examples

MEASUREMENT:M

EAS3:COUNT?

might return :MEASUREMENT:MEAS3:COUNT

3247.

MEASUrement:MEAS<x>:DELay? (Query Only)

Returns the delay measurement parameters for the measurement speciﬁed by

<x>, which ranges from 1 through 8.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:DELay?

Examples

MEASUREMENT:MEAS1? might return

:MEASUREMENT:MEAS1:DELAY:DIRECTION FORWARDS;EDGE1 RISE;EDGE2

RISE

MEASUrement:MEAS<x>:DELay:DIRection

This command speciﬁes the starting point and direction that determines

the delay "to" edge when taking a delay measurement. Use the

MEASUrement:MEAS<x>:SOUrce<x> command to specify the waveform.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:DELay:DIRection {BACKWards|FOR Wards}

MEASUrement:MEAS<x>:DELay:DIRection?

Related Commands

MEASUrement:MEAS<x>:SOUrce<x>

Arguments

BACKWards means the search starts at the end of the waveform and

looks for the last rising or falling edge in the waveform. Use the

MEASUrement:MEAS<x>:DELay:EDGE<x> command to specify the slope

of the edge.

FORWards means the search starts at the beginning of the waveform

and looks for the ﬁrst rising or falling edge in the waveform. Use the

MEASUrement:MEAS<x>:DELay:EDGE<x> command to specify the slope

of the edge.

2-434 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Program Manual

Other manuals for Tektronix MDO3000 Series