Tektronix MDO3024 Installation And Safety Instructions

Power-On and Power-Off Procedure
Quick Tips
Your oscillosc
ope shipped with a CD that contains a variety of Windows-based
software tools for efficient connectivity between your oscilloscope and your
computer. These include toolbars that speed connectivity with Microsoft
Excel and Word. There is also a standalone acquisition program called
Tektronix OpenChoice Desktop.
The rear-panel U SB 2.0 device port is the correct USB port for computer
connectivity. Use the rear and front panel USB 2.0 host ports to connect your
oscilloscope to USB flash drives. Use the USB Device port to connect your
oscillosc
ope to a PC or a PictBridge printer.
USB Host p
ort
USB Devic
eport
30 MDO3000 Installation and Safety Instructions

Tektronix MDO3024 Specifications

General

Analog Channels	4
Bandwidth	200 MHz
Sample Rate	2.5 GS/s
Record Length	10 Mpoints
Digital Channels	16 (optional)
Spectrum Analyzer Frequency Range	9 kHz to 3 GHz
Digital Voltmeter	4-digit
Vertical Resolution	8 bits
Operating Temperature	0 °C to +50 °C
Display	9-inch WVGA (800x480) color display
Connectivity	USB, LAN, GPIB (optional)
Arbitrary Function Generator	50 MHz
Trigger Modes	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold
Input Impedance	1 MΩ ±1%
Max Input Voltage	300 VRMS
Trigger Types	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold