Tektronix MDO4104-6

Installation
6. Power on the osc
illoscope.
7. Push Utility.
8. Push Utility Page.
Utility
Page
9. Turn mu
ltipurpose knob a and select Config.
Config
10. Push About. T he oscilloscope displays the
firmware version number.
Utility
Page
Config
Language
English
Set Da
te &
Time
TekSe
cure
Erase
Memory
About
11. Confirm that the version number matches
that of the new firmware.
MDO4000 Series Oscilloscopes User Manual 23