Tektronix MDO4104 - Page 68

Performance Verification
Crosstalk to RF channel from analog channels
Channel 4 crosstalk
Low limit Test result High limit
100 MHz
N/A
-68 dBm
200 MHz
N/A
-68 dBm
300 MHz
N/A
-68 dBm
400 MHz
N/A
-68 dBm
500 MHz
N/A
-68 dBm
600 MHz
N/A
-68 dBm
700 MHz
N/A
-68 dBm
800 MHz
N/A
-68 dBm
900 MHz
N/A
-68 dBm
1GHz N/A
-68 dBm
1.1 GHz N/A
-48 d B
m
1.2 GHz N/A
-48 d B
m
1.3 GHz N/A
-48 d
Bm
1.4 GHz N/A
-48 d
Bm
1.5 GHz N/A
-48
dBm
1.6 GHz N/A
-4
8 dBm
1.7 GHz N/A
-4
8 dBm
1.8 GHz N/A
-
48 dBm
1.9 GHz N/A
-
48 dBm
Generator signal frequency and
Oscilloscope Center Frequency setting
2GHz N/A
-48 dBm
Auxiliary (Trigger) Output
Performance checks
Low limit Test result High limit
High 1 M
 2.5 V
–
Trigger Output
Low 1 M
–
 0.7 V
High 50 
 1.0 V
–
Trigger Output
Low 50 
–
 0.25 V
With TPA-N-PRE Attached:
With TPA-N-PRE attached: Displayed Average Noise Level (DANL)
Performance checks
Low limit Test result H igh limit
50kHz–5MHz
N/A - 140 dB m/Hz
All models (with
TPA-N-PRE attached)
5 MHz – 3 G Hz N/A - 158 dBm/Hz
3 GHz – 4 GHz N/A - 150 dBm/HzMDO4XX4-6 only (with
TPA-N-PRE attached)
4 GHz – 6 GHz N/A - 150 dBm/Hz
60 MDO4000 Series Specifications and Performance Verification