Operating basics
Refer to the 5 Series MSO (MSO54, MSO56, MSO58) Installation and Safety Manual (Tektronix part number 071-3514-xx), for
details on understanding and using the graphical user interface to trigger on and acquire waveforms and take measurements.
Refer to the 5 Series MSO MSO54, MSO56, MSO58, MSO58LP Programmer Manual (Tektronix part number 077-1305-xx) for
the correct command or commands to use to remotely operate the instrument.
Both manuals are available to download from www.tek.com/product-support.
MSO58LP Installation and Safety Manual 17
To Next Page
Loading...
