Tektronix MSO 5 Series

Index
A
ACQ acquisition status LED, 7
AFG Out (rear panel), 9
automatic probe compensation (TPP0500, TPP1000), 13
AUX Out (rear panel), 9
Aux Trig trigger input, 7
C
cable lock, 9
clock format (12/24 hr), how to set, 11
compensate TPP0500, TPP1000 probes, 13
connect lock cable, 3
connect to a network, 14
connecting probes, 5
D
Display Port video output (rear panel), 9
DVI video output (rear panel), 9
E
e*Scope, 15
Environment requirements, 1
Ethernet port (rear panel), 9
Ethernet, connect to, 14
F
firmware, how to update, 11
FlexChannel inputs, 7
front panel controls, 7
H
how to
check power-on self tests results, 4
compensate TPP0500, TPP1000 probes, 13
connect probes, 5
connect to network, 14
download, install firmware, 11
remote access the oscilloscope (from Web), 15
run signal path compensation (SPC), 12
set clock format (12/24 hr), 11
set time zone, 11
update firmware, 11
I
input signal level requirements, 2
L
LAN port (rear panel), 9
LAN status LEDs, 7
LAN, connect to, 14
lock to bench or rack, 3
N
network, connect to, 14
O
operating
altitude range, 1
humidity range, 1
temperature range, 1
operating power requirements, 1
P
power cord connector (rear panel), 9
power requirements, 1
power standby mode, 4
power-on test results, 4
powering on or off, 4
probe comp connectors, 7
probe compensation (TPP0500, TPP1000), 13
probes, connecting, 5
R
rear panel
MSO58LP Installation and Safety Manual 25