Install your instrument
Check shipped accessories
Make sure that you received everything you ordered. If anything is missing, contact Tektronix Customer Support. In North
America, call 1-800-833-9200. Worldwide, visit www.tek.com to find contacts in your area.
Check the packing list that came with your instrument to verify that you have received all standard accessories and ordered
items. If you purchased factory installed options such as a Serial Bus and Triggering option, or the Power measurements option,
tap Help > About to confirm that the option(s) are listed in the Installed Options table.
MSO54, MSO56, MSO58 standard accessories
Item Quantity Tektronix part number
5 Series MSO (MSO54, MSO56, MSO58) Installation and Safety Manual 1 071-3514-xx
TPP0500B Passive Voltage Probe (500 MHz bandwidth). Shipped with
350 MHz and 500 MHz models.
One per channel TPP0500B
TPP1000 Passive Voltage Probe (1 GHz bandwidth). Shipped with 1 GHz
and 2 GHz models.
One per channel TPP1000
Front cover 1 200-5406-xx
Accessory pouch (attached to front cover) 1 016-2106-xx
Mouse (wired with USB connector) 1 119-7054-xx
Power cord 1 Depends on region
Calibration certificate 1 N/A
Report of factory installed licenses 1 N/A
MSO58LP standard accessories
Item Quantity Tektronix part number
5 Series MSO MSO58LP Installation and Safety Manual 1 071-3568-xx
Power cord 1 Depends on region
Calibration certificate 1 N/A
Report of factory installed licenses 1 N/A
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help 23