Tektronix TCP303 Service Manual

TCP303 and TCP404XL Performance Verification
Equipment Required
Toperformtheacceptancetestsinthissection, you will need the listed test
equipment. The test equipment must meet or exceed the specifications listed.
The test procedures may need to be modified if the recommended equipment is
not used.
Table 17: Re
quired test equipment
Qty Item Description Recommended
1
Oscilloscope
100 MHz ban
dwidth
Tektronix TDS5000
1
High Amplitude Pulse Generator
(TCP303 only)
Rise time <
5 ns, pulse width >100 ns
amplitude >20 V
p-p
into 50 Ω
Picosecon
d Labs 2600
1
High Amplitude Pulse Generator
(TCP404
XL only)
Square wave with a rise time <35 ns,
≥5Ainto
50 Ω
AVTECH AVR-3-PW-C-P-TEK2
1
Leveled
Sine Wave Generator
(TCP303 only)
3MHzto20MHz
Wavetek
9100 with Option 250
1
Current Source DCA: 0.1% accuracy, 0 to ±15 A
Wavete
k 9100
1Digita
l Multimeter
DCV: 0.1% accuracy, 5
1
/
2
digit
resolution
Keithl
ey 2700
1
Current Probe Amplifier Use appropriate amplifier Tektronix TCPA300 or TCPA400
1
BNC Cable 50 Ω, 0.76 m (30 in) long
Tektronix part number 012-0117-00
1
Cable TEKPROBE Interface
Tektronix part number 012-1605-00
1 Adapter
BNC-to-Dual Banana
Tektronix part number 103-0090-00
1
HF Current Loop (TCP303 only) 50 Ω, BNC Connector
Tektronix part number 015-0601-50
1
DC Current Loop 50 turns 13 AWG coated wire (See page 4, Making DC Current
Lo
ops.)
1 Precision Termination
5
0 Ω ±0.1%, 0.5 W
Tektronix part number 011-0129-00
32 TCPA300/400 Amplifiers and TCP300/400 Series Current Probes Service Manual

Tektronix TCP303 Specifications

General

Brand	Tektronix
Model	TCP303
Category	Amplifier
Language	English