Tektronix TDS2024 User Manual

Reference
TDS1000/2000-Series Digital Oscilloscope User Manual
83
Video Signal
When you use the Autoset function and the oscilloscope determines
that the signal is a video signal, the oscilloscope displays the
following options:
Video signal
options
Details
All Fields
Displays several fields and the oscilloscope triggers on any
field
All Lines
Displays one complete line with parts of the previous and
next line; the oscilloscope triggers on any line
Line Number
Displays one complete line with parts of the previous and
next line; turn the USER SELECT knob to select a specific
line number for the oscilloscope to use as a trigger
Odd Fields
Displays several fields and the oscilloscope triggers only on
odd fields
Even Fields
Displays several fields and the oscilloscope triggers only on
even fields
Undo Setup Causes the oscilloscope to recall the previous setup
NOTE. Video autoset sets the Display Type option to Dot Mode.

Tektronix TDS2024 Specifications

General

Channels	4
Bandwidth	200 MHz
Sample Rate	2 GS/s
Record Length	2.5k points
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Display Resolution	320 x 240 pixels
Math Functions	Add, Subtract, Multiply, Divide, FFT
Input Coupling	AC, DC, GND
Trigger Modes	Auto, Normal, Single
Trigger Types	Edge, Video, Pulse
Connectivity	USB
Input Impedance	1 MΩ
Maximum Input Voltage	300 V
Interface	USB
Power Supply	100 to 240 V
Dimensions	326 mm x 158 mm x 124 mm