Tektronix TDS2024 User Manual

Reference
80
TDS1000/2000-Series Digital Oscilloscope User Manual
The Autoset function examines all channels for signals and displays
corresponding waveforms.
Autoset determines the trigger source based on the fol lowing
conditions:
H If multiple channels have signals, channel with the lowest
frequency signal
H No signals found, the lowest-numbered channel displayed when
Autoset was invoked
H No signals found and no channels displayed, oscilloscope
displays and uses channel 1

Tektronix TDS2024 Specifications

General

Channels	4
Bandwidth	200 MHz
Sample Rate	2 GS/s
Record Length	2.5k points
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Display Resolution	320 x 240 pixels
Math Functions	Add, Subtract, Multiply, Divide, FFT
Input Coupling	AC, DC, GND
Trigger Modes	Auto, Normal, Single
Trigger Types	Edge, Video, Pulse
Connectivity	USB
Input Impedance	1 MΩ
Maximum Input Voltage	300 V
Interface	USB
Power Supply	100 to 240 V
Dimensions	326 mm x 158 mm x 124 mm