Important safety information
Important saf
ety information
This manual c
ontains information and warnings that must be followed by the user
for safe operation and to keep the product in a safe condition.
General safety summary
Use the product only as specified. Review the following safety precautions to
avoid injury a nd prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
This product is not intended for detection of hazardous voltages.
To avoid fire or personal
injury
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
informa
tion b efore making connections to the product.
Do not apply a potential to any terminal, including the common terminal, that
exceed
s the maximum rating of that terminal.
Do not operate without covers. Do not operate this product with covers or panels
removed, or with the case open. Hazardous voltage exposure is possible.
Avoid exposed circuitry. Do not touch exposed connections and components
when
power is present.
Do not operate in wet/damp conditions. Be aware that condensation may occur if
a unit is moved from a cold to a warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry. Remove the input signals before you clean
the p roduct.
Probes and test leads
Remove all probes, test leads and accessories that are not in use .
Inspect the probe and accessories. Before each use, inspect probe and access ories
for damage (cuts, tears, or defects in the probe body, accessories, or cable jacket).
Do not use if damaged.
Use only the specified replacement parts.
iv P7700 Series TriMode Probes Te chnical Reference
To Next Page
Loading...
Need help?
General
