Host instrument firmware
Host instrume
nt firmware
Some oscillo
scopes might re quire a firmware upgrade to support full functionality
of the P7700 Series probes. Instruments with lower versions of firmware might
not display all probe controls and indicators on screen, and in some cases require
you to power-cycle the instrument to restore normal instrument operation.
The following table lists the required versions of instrument firmware for some of
the oscilloscopes that currently support the P7700 Series probes.
Instrument Firmware Version
MSO/DSA/DPO70000C Series oscilloscope
V 7.6 or higher
DSA/DPO70000D Series oscilloscope
V 7.6 or higher
MSO/DPO70000DX Series oscilloscope
V 7.6 or higher
DSO70000SX Series oscilloscopes
V 10.4 or higher
To chec
kthefirmware version on Windows-based instruments, from the menu bar,
click Help/About TekScope. If you need to upgrade your instrument firmware, go
to www.tek.com/downloads to download the latest firmware.
P7700 Series TriMode Probes Technical Reference 47
To Next Page
Loading...
