TEL AFA4000/E - Page 143

AFA4000/E VAV Airflow Controller / p.143
Menu item
Option
Instructions
Input / Output
Diagnostics (cont.)
> 0-10V 0-20mA
BMS 10V 20mA
Output test settings.
Select a voltage or current for the outputs
for testing.
Editable parameters are:
• 0-10V. Press Mute to scroll through the
options:
• 0V
• 2V
• 4V
• 6V
• 8V
• 10V
• 0-20mA. Press Mute to scroll through
the options:
• 0mA
• 4mA
• 8mA
• 12mA
• 16mA
• 20mA
Factory Tests
Test Main Board
1187A (harness)
Follow the on-screen instructions to carry
out the test.
Test PIM Module
1187B (harness)
Follow the on-screen instructions to carry
out the test.
Test Keypad
1186
Follow the on-screen instructions to carry
out the test.
Technical
Information
S1 Motor Volts
Current setting of the Sash 1 motor
voltage.
S1 Motor Dir
Current setting of the Sash 1 motor
direction.
S1 PIN Type
Current setting of the Sash 1 PIN type.
S1 String Type
Current setting of the Sash 1 String type.
S1 String Dir
Current setting of the Sash 1 String
direction.
S1 Top Position
Current setting of the Sash 1 top position.