TEL AFA4000/E - Page 17

AFA4000/E VAV Airflow Controller / p.17
Pushbutton II:
Lights On/Off
Displayed when the pushbutton is set to Lights operation.
UV Lights On/Off
Displayed when the pushbutton is set to UV Lights operation.
Services On/Off
Displayed when the pushbutton is set to Australian Standards
operation.
Pump On/Off
Displayed when the pushbutton is set to Pump operation.
Setback O/R
Displayed when the pushbutton is set to Night Setback Override
operation.
Pushbutton III:
Scrubber On/Off
Displayed when the pushbutton is set to Scrubber operation.
Lights On/Off
Displayed when the pushbutton is set to Lights operation.
Purge On/Off
Displayed when the pushbutton is set to Purge VAV operation.
MIN
Displayed with the pushbutton is set to Min/Run/Max VAV
operation
RUN
Displayed with the pushbutton is set to Min/Run/Max VAV
operation
MAX
Displayed with the pushbutton is set to Min/Run/Max VAV
operation
Mute
The alarm has a multifunctional Mute button, .
Press Mute once, when the alarm is sounding to mute the alarm.
Press Mute for 5 seconds to access the calibration and
configuration menus.
↑ / ↓
Use the ↑ and ↓ buttons to scroll through the calibration and
configuration menus or to select options and values.