• The lowest and highest base and sash positions are
calibrated.
• The sash automatically drives to the bottom position,
when the user is not present.
• Press the ↓ pushbutton to drive the sash to the bottom
position, when the user is present.
• Press the ↑ pushbutton to drive the sash to the mid-
position, when the user is present.
• When the Tiptronic feature is enabled, manually tip the
sash upwards and the sash will drive to the mid-position.
• Manually tip the sash downwards and the sash will drive
to the bottom position.
• When the Auto Open feature is enabled, the sash
automatically drives to the mid-position when the user is
present.
• There is a time delay following user detection.
• When a base movement is detected new open and closed
positions are set to maintain the calibrated opening
height from the base and to stop the sash at the new base
position.
To Next Page
Loading...