Field Value
be used.
The function is activated by selecting ,.
The function is enabled by default.
Group Description Define a new RADIUS group description or assign the new RA-
DIUS entry to a predefined group. The configured RADIUS
servers for a group are queried according to Priority and the
Policy .
Possible values:
• '1 (default value): Enter a new group description in the text
field.
• .!3, 3) : Select this entry for special applications,
such as Hotspot Server configuration.
• A3) 'B: Select a predefined group from the list.
The Advanced Settings menu consists of the following fields:
Fields in the Advanced Settings menu.
Field Value
Policy Select how your device is to react if a negative response to a re-
quest is received.
Possible values:
• -3 (default value): A negative response to a
request is accepted.
• '3 : A negative response to a request is
not accepted. A request is sent to the next RADIUS server un-
til your device receives a response from a server configured
as authoritative.
UDP Port Enter the UDP port to be used for RADIUS data.
RFC 2138 defines the default ports 1812 for authentication
(1645 in older RFCs) and 1813 for accounting (1646 in older
RFCs). You can obtain the port to be used from the documenta-
tion for your RADIUS server.
The default value is .
10 System Management Teldat GmbH
100 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
