Field Description
Also select whether the test cells of the OAM CC are to be sent
or received.
Possible values:
• = (default value): CC data is both received and generated.
• *7: CC data is received.
• *3": CC data is generated.
Continuity Check (CC)
Segment
Select whether you want to activate the OAM-CC test for the
segment connection (segment = connection of the local end-
point to the next connection point) of the VCC or VPC.
Possible values:
• ## (default value): OAM CC requests are responded to
after CC negotiation (CC activation negotiation).
• -": OAM CC requests are sent after CC negotiation (CC
activation negotiation).
• =: OAM CC requests are sent and answered after CC ne-
gotiation (CC activation negotiation).
• '  : Depending on the setting in the Direction
field, OAM CC requests are either sent and/or responded to.
There is no CC negotiation.
• ': The function is disabled.
Also select whether the test cells of the OAM CC are to be sent
or received.
Possible settings:
• = (default value): CC data is both received and generated.
• *7: CC data is received.
• *3": CC data is generated.
17.3 Leased Line
A leased line is a permanent (fixed) connection between two communication partners via a
telecommunications network. Unlike a switched line, the entire transmission channels is al-
ways available. The leased line cannot be set up by the subscriber by dialling and therefore
has no call number. The connection must be set up by the network operator.
Teldat GmbH
17 WAN
bintec Rxxx2/RTxxx2 315
To Next Page
Loading...
Need help?
General
