Field Description
you can select up to three CA certificates that are accepted for
this profile.
This option can only be configured if certificates are loaded.
18.1.3 Phase-2 Profiles
You can define profiles for phase 2 of the tunnel setup just as for phase 1.
In the VPN->IPSec->Phase-2 Profiles menu, a list of all configured IPSec phase 2 profiles
is displayed.
Fig. 134: VPN->IPSec->Phase-2 Profiles
In the Default column, you can mark the profile to be used as the default profile.
18.1.3.1 New
Choose the New button to create additional profiles.
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2 349
To Next Page
Loading...
Need help?
General
