Field Description
authentication. If no response is given or access is denied (only
if Policy = '3), the entry with the next-
highest priority is used.
The available values are to , the default value is .
Entry active Select whether this server is to be used for login authentication.
The function is activated by selecting ,.
The function is enabled by default.
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu.
Field Description
Policy Select the interpretation of the TACACS+ response.
Possible values:
• '3 (default value): The TACACS+ serv-
ers are queried in order of their priority (see Priority) until a
positive response is received or a negative response has
been received from an authoritative server.
• -3: A negative response to a request is accep-
ted, i.e. a request is not sent to another TACACS+ server.
The device's internal user administration is not turned off by
TACACS+. It is checked after all TACACS+ servers have been
queried.
TCP Port Shows the default TCP port ( ) used for the TACACS+ pro-
tocol. The value cannot be changed.
Timeout Enter time in seconds for which the NAS is to wait for a re-
sponse from TACACS+.
If a response is not received during the wait time, the next con-
figured TACACS+ server is queried (only if Policy = '
3) and the status of the current server is set to
=,"7.
The possible values are to , the default value is $.
10 System Management Teldat GmbH
104 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
