Field Description
• 2-
• 2- .!3,
• "7 *1" (default value)
2- and 2- .!3, are only for the use of X.31 TEI for
CAPI applications. For 2-, the TEI value set in the CAPI ap-
plication is used. For 2- .!3,, the value of the CAPI ap-
plication is ignored and the default value set here is always
used.
"7 *1" is set if you want to use X.31 TEI for the X.25
device.
ISDN-PRI interface
For a Primary Rate Interface (PRI, or S2M), the channels are transmitted in series in so-
called time slots.
Choose the button to edit the configuration of the ISDN port.
Teldat GmbH
11 Physical Interfaces
bintec Rxxx2/RTxxx2 129
To Next Page
Loading...