Field Description
Generate default route
for the AS
If this option is activated, the gateway propagates a default
route over all active OSPF interfaces.
The function is disabled by default.
Propagate routes
bound on discard/re-
fuse interface
The logical interfaces REFUSE and IGNORE have the following
meaning:
REFUSE means (if a route exists on this) that packets from this
interface are discarded and an ICMP Unreachable Reply is gen-
erated.
IGNORE means (if a route exists on this) that packets from this
interface are discarded without comment.
If the option is activated, routes connected to the two discard/re-
fuse interfaces are saved by OSPF in its database. If the option
is deactivated, these routes are ignored.
The function is disabled by default.
Dynamic LS Update
Compression
Only for RXL1250 / RXL12100
Enable or disable the function.
The function is disabled by default.
Teldat GmbH
15 Routing Protocols
bintec Rxxx2/RTxxx2 253
To Next Page
Loading...
Need help?
General
