16.4.1.1 Edit or New
Choose the icon to edit existing entries. To configure PIM lists, select the New button.
Fig. 112: Multicast->PIM->PIM Interfaces->New
The Multicast->PIM->PIM Interfaces->New menu consists of the following fields:
Fields in the PIM Interface Settings menu.
Field Description
Interface Choose the interface used for PIM, i.e. over which multicast
routing is operated.
PIM Mode Indicates the mode to be used for PIM. Your device uses PIM in
sparse mode. The entry cannot be changed.
Use as Stub interface
Determine whether or not the interface is used for PIM data
packets. This parameter allows you to use an interface for IG-
MP, for example, whilst preventing (fake) PIM messages.
If this function is deactivated (default value), the PIM data pack-
ets for this interface are blocked.
If the function is active, the interface for the PIM data packets
Teldat GmbH
16 Multicast
bintec Rxxx2/RTxxx2 263
To Next Page
Loading...