Field Description
Always on Select whether the interface should always be activated.
The function is enabled with ,.
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Connection Idle
Timeout
Only if Always on is disabled.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are to $ (seconds). deactivates the
short hold.
The default value is $.
Example: for FTP transmission, for LAN-to-LAN transmis-
sion, for Internet connections.
Fields in the IP Mode and Routes menu.
Field Description
IP Address Mode Choose whether your device has a static IP address or is as-
signed one dynamically.
Possible values:
• -## (default value): Your device is dynamically
assigned an IP address.
• *": You enter a static IP address.
Default Route Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with ,.
The function is enabled by default.
Create NAT Policy Specify whether Network Address Translation (NAT) is to be ac-
tivated.
17 WAN Teldat GmbH
284 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
