Field Description
User Name Enter the user name.
Password
Enter the password.
Always on Select whether the interface should always be activated.
The function is enabled with ,.
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
rate charge.
Connection Idle
Timeout
Only if Always on is disabled.
Enter the idle time in seconds for static short hold. The static
short hold setting determines how many seconds should pass
between sending the last traffic data packet and clearing the
connection.
Possible values are to $ (seconds). deactivates the
short hold.
The default value is .
Fields in the IP Mode and Routes menu.
Field Description
IP Address Mode
Select whether your device is to be assigned a static IP address
or whether it should be assigned this dynamically or whether it
should be assigned this dynamically at the remote terminal.
Possible values:
• -## (default value): Your device is dynamically
assigned an IP address.
• *": You enter a static IP address.
• -##: Your device dynamically assigns an
IP address to the remote terminal.
Default Route
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with ,.
Teldat GmbH
17 WAN
bintec Rxxx2/RTxxx2 297
To Next Page
Loading...
Need help?
General
