Field Description
the default route.
The function is enabled with ,.
The function is disabled by default.
Local IP Address Only for IP Address Assignment = *" or > 2!
% *
Enter the WAN IP address of your IPSec tunnel. This can be the
same IP address as the address configured on your router as
the LAN IP address.
Metric
Only for IP Address Assignment = *" or > 2!
% 2, and Default Route = ,
Select the priority of the route.
The lower the value, the higher the priority of the route.
Value range from  to . The default value is .
Route Entries Only for IP Address Assignment = *" or > 2!
% 2,
Define routing entries for this connection partner.
• @  -##: IP address of the destination host or
LAN.
• '#7: Netmask for @  -##.
• %": The lower the value, the higher the priority of the
route (possible values ). The default value is .
Fields in the menu Additional Traffic Filter
Field Description
Additional Traffic Filter Only for Internet Key Exchange = >
Use Add to create a new filter.
Additional data traffic filters
Teldat Gateways support two different methods for establishing IPSec connections:
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2 331
To Next Page
Loading...
Need help?
General
