Teldat bintec RT1202 User Manual

Fig. 131: VPN->IPSec->IPSec Peers->New->Add
Fields in the menu Basic Parameters
Field Description
Description Enter a description for the filter.
Protocol Select a protocol. The -& option (default value) matches any
protocol.
Source IP Address/
Netmask
Enter, if required, the source IP address and netmask of the
data packets.
Possible values:
• -&
• ?#: Enter the IP address of the host.
• '17 (default value): Enter the network address and the
related netmask.
Source Port Only for Protocol = (2 or 0.
Enter the source port of the data packets. The default setting 
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2 333

Teldat bintec RT1202 Specifications

General

Brand	Teldat
Model	bintec RT1202
Category	Gateway
Language	English