Field Description
Compression If necessary, select the type of encryption that should be used
for data traffic to the connection partner. If encryption is set, the
remote terminal must also support it, otherwise a connection
cannot be set up.
Possible values:
• ' (default value): Encryption is not used.
• *(-2
• %**(-2
• %2: Microsoft Point-to-Point Compression
LCP Alive Check Select whether the availability of the remote terminal is to be
checked by sending LCP echo requests or replies. This is re-
commended for leased lines, PPTP and L2TP connections.
The function is enabled with ,.
The function is enabled by default.
Prioritize TCP ACK
Packets
Select whether the TCP download is to be optimised in the
event of intensive TCP upload. This function can be specially
applied for asymmetrical bandwidths (ADSL).
The function is enabled with ,.
The function is disabled by default.
Fields in the IP Options menu.
Field Description
OSPF Mode Select whether and how routes are propagated via the interface
and/or OSPF protocol packets are sent.
Possible values:
• ## (default value): OSPF is not activated for this inter-
face, i.e. no routes are propagated or OSPF protocol packets
sent over this interface. Networks reachable over this inter-
face are, however, included when calculating the routing in-
formation and propagated over active interfaces.
• -": OSPF is activated for this interface, i.e. routes are
propagated or OSPF protocol packets sent over this interface.
Teldat GmbH
18 VPN
bintec Rxxx2/RTxxx2 369
To Next Page
Loading...
Need help?
General
