Fig. 159: VoIP->Media Gateway->Call Routing-> +New
The VoIP->Media Gateway->Call Routing-> +New menu consists of the following
fields:
Fields in the Basic Parameters menu.
Field Description
Description Enter the name of the entry.
Administrative Status Select whether the entry should be activated.
The function is enabled with ,.
The function is enabled by default.
Type Specify how calls are to be routed.
Possible values:
• -"") @3,: For calls forwarded by the media gateway to
a PBX or an ISDN TE connector or a SIP DDI client. For this,
the following can be used: PRI interfaces in NT mode, BRI in-
20 VoIP Teldat GmbH
416 bintec Rxxx2/RTxxx2
To Next Page
Loading...