Field Description
Command Mode
Only if Command Type = %=5*'%
Select how the MIB entry is to be manipulated.
Possible settings:
• 2 <# & (default value): An existing entry
shall be modified.
• 2 1 %= &: A new entry shall be created.
Index Variables
Only if Command Type = %=5*'%
Where required, select MIB variables to uniquely identify a spe-
cific data set in MIB Table, e.g. 2!<. The unique
identification of a particular table entry is derived from the com-
bination of Index Variable (usually an index variable which is
flagged with *) and Index Value.
Use Index Variables to create more entries with Add.
Trigger Status
Only if Command Type = %=5*'%
Select what status the event must have in order to modify the
MIB variable as defined.
Possible values:
• -" (default value): The value of the MIB variable is mod-
ified if the initiator is active.
• ": The value of the MIB variable is modified if the ini-
tiator is inactive.
• =: The value of the MIB variable is differentially modified if
the initiator status changes.
MIB Variables
Only if Command Type = %=5*'%
Select the MIB variable whose value is to be configured as de-
pendent upon initiator status.
If the initiator is active (Trigger Status -"), the MIB vari-
able is described with the value entered in Active Value.
If the initiator is inactive (Trigger Status "), the MIB
variable is described with the value entered in Inactive Value.
Teldat GmbH
21 Local Services
bintec Rxxx2/RTxxx2 469
To Next Page
Loading...