Field Description
Enter a subject name with attributes.
Example: O2'I6'*E .2I&E .2I"E
"I.O
CA Name
Only for Command Type = 2!" % and
Action = *2
Enter the name of the CA certificate of the certification authority
(CA) from which you wish to request your certificate, e.g.
"11#. Your CA administrator can provide you with the
necessary data.
Password
Only for Command Type = 2!" % and
Action = *2
To obtain certificates, you may need a password from the certi-
fication authority. Enter the password you received from the cer-
tification authority here.
Key Size
Only for Command Type = 2!" % and
Action = *2
Select the length of the key to be created. Possible values are
(default value) to and .
Autosave Mode
Only for Command Type = 2!" % and
Action = *2
Select whether your device automatically stores the various
steps of the enrolment internally. This is an advantage if enrol-
ment cannot be concluded immediately. If the status has not
been saved, the incomplete registration cannot be completed.
As soon as the enrolment is completed and the certificate has
been downloaded from the CA server, it is automatically saved
in the device configuration.
The function is enabled by default.
Use CRL
Only for Command Type = 2!" % and
Action = *2
Define the extent to which certificate revocation lists (CRLs) are
to be included in the validation of certificates issued by the own-
21 Local Services Teldat GmbH
476 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
