Fig. 215: Monitoring->IPSec->IPSec Tunnels->
Values in the IPSec Tunnels list
Field Description
Description Shows the description of the peer.
Local IP Address Shows the WAN IP address of your device.
Remote IP Address Shows the WAN IP address of the connection partner.
Local ID Shows the ID of your device for this IPSec tunnel.
Remote ID Shows the ID of the peer.
Negotiation Type Shows the exchange type.
Authentication Method Shows the authentication method.
MTU Shows the current MTU (Maximum Transfer Unit).
Alive Check Shows the method for checking that the peer is reachable.
NAT Detection Displays the NAT detection method.
Local Port Shows the local port.
Remote Port Shows the remote port.
Packets Shows the total number of incoming and outgoing packets.
Bytes Shows the total number of incoming and outgoing bytes.
Errors Shows the total number of errors.
IKE (Phase-1) SAs (x) The parameters of the IKE (Phase 1) SAs are displayed here.
24 Monitoring Teldat GmbH
532 bintec Rxxx2/RTxxx2
To Next Page
Loading...
Need help?
General
