Teldat V User Manual

TELDAT V – Installation Manual
I - 25
Doc.DM567-I
Rev.4.0
Appendix B
Troubleshooting
Below, you will find a table, which will help you to solve problems during the installation of the
router. If you cannot resolve the problem, please consult your distributor for additional
information.
Symptom
Solution
None of the LEDs lights up on the
router.
Check the power supply to the router (power source,
ON/OFF switch, main power outlet).
You have forgotten the access
password for the router.
Ignore the configuration through the RST button as
explained in the section relative to the RST button.
The DSL LED never lights up in
green.
If the device has an xDSL interface available, check the
connection to the network or to the splitter and make
sure that the telephone line you are connected supports
xDSL service.
The Eth WAN LED never lights up
in green.
Check the Ethernet cable and the connection to the
network.
The Wi-Fi LED never lights up in
green.
Check the router’s configuration and that for the remote
station(s).
Check the appropriate license is available for its use.
The USB LED never lights up in
green.
Check that the device inserted in the USB connector is
supported by the router.
Please check the Teldat website www.teldat.com to get
the list of 3G USB modems that are supported.
Check the appropriate license is available for its use.
Updating the software
The Teldat V router can be updated to new releases. Please consult your distributor for further
details on new releases.
There are various ways to update a Teldat router: For further information, please see the manual
on updating software: “Dm 748-I Software Updating”.
The software required to update Teldat routers is supplied in a format known as distribution.
This consists of a single file which contains all the files needed to update your device as well as
in-depth information on the contents of the files.

Teldat V Specifications

General

Brand	Teldat
Model	V
Category	Network Router
Language	English