Teldat V User Manual

TELDAT V – Installation Manual
I - 26
Doc.DM567-I
Rev.4.0
The Teldat V incorporates independent modules for the Wireless WAN interface. You can use
modules from various manufacturers, or even various modules from the same manufacturer,
depending on the technology used. Generally the modules’ firmware is independent of the
device’s software. There is an UPGRADE file for each Wireless WAN module. Please ask you
distributor for the correct UPGRADE file for the module in your device. The document
describing the Cellular interface (manual Dm 781-I) explains how to UPGRADE the module.
Connectors
LAN Connector
RJ45 LAN
RJ45 PIN
FE Signals
GE Signals
1
2
3
4
5
6
7
8
BI-DA+
BI-DA-
BI-DB+
--
--
BI-DB-
--
--
BI-DA+
BI-DA-
BI-DB+
BI-DC+
BI-DC-
BI-DB-
BI-DD+
BI-DD-
TABLE 5. LAN CONNECTOR
WAN Connector
RJ45 WAN
RJ45 PIN
FE Signals
GE Signals
1
2
3
4
5
6
7
8
BI-DA+
BI-DA-
BI-DB+
--
--
BI-DB-
--
--
BI-DA+
BI-DA-
BI-DB+
BI-DC+
BI-DC-
BI-DB-
BI-DD+
BI-DD-
TABLE 6. WAN CONNECTOR
WWAN/Cell Connector (female)
PIN
ANT
Internal
External
RF in/out
GND
TABLE 7. WWAN/CELL CONNECTOR

Teldat V Specifications

General

Brand	Teldat
Model	V
Category	Network Router
Language	English