Teldat V User Manual

TELDAT V – Installation Manual
I - 10
Doc.DM567-I
Rev.4.0
connection.
Green  connected. Blinking:
connection data
activity.
Cobertura
(1, 2, 3, 4)
Monochrome
blue
Indicates the coverage level the 3G internal module
has. 0 level (all LEDs off) to 4 (all LEDs on).
TABLE 4. LEDS TABLE
Mounting in rack
The Teldat V router cannot be mounted in a rack. However there are other types of mounting.
Standalone
The Teldat V router can be placed as a standalone on a flat, stable surface.
You need to make sure that there is enough space around the router for ventilation purposes and
ensure that the electricity cables can reach it.
Wall mounting
The Teldat V can be mounted on the wall.
There are two slots on the underside of the device which are used to fix it to the wall. You can
see this in the section on the “Underside panel”.
You must provide the screws and wall anchors. We recommend the following accessories for
wall mounting, valid for solid wall and Gypsum board (plaster) wall:
• 2 screws: [COACH SCREW HEAD 90 DEGR.POZIDR. 3,5x30]

Teldat V Specifications

General

Brand	Teldat
Model	V
Category	Network Router
Language	English