Teleste MCC201 - Initialization of IP Address

MCC201/MCC201H User manual
3. System Operation • 15
Initialization of IP address
If needed the IP address of the device can be restored to factory default values by using the reset button on
the rear side of the MCC device.
1. While system is in operation, press the reset button for more than 5 seconds.
2. The device shall reboot (see the led indicators).
3. Once the device has completed the reboot and has restarted, the default IP address settings are as follows:
•
IP mode Fixed IP
•
IP address 192.168.10.100
•
Subnet mask 255.255.255.0
•
Gateway 192.168.10.1
•
Base port 2222
•
HTTP port 80