20 • 4. Remote Configuration
MCC201/MCC201H User manual
Automatically synchronize with NTP server
Synchronize the camera time with an NTP server using NTP (network time protocol).
Name of the NTP server should be registered on NTP server Name.
Reboot
To reboot the video server operation.
Do not press the Reboot button unless the server needs a reboot.
Factory Reset
All settings including user accounts and logs are cleared.
Factory Reset except network settings
All the settings except for current network settings are changed to default values.
The Network Time Protocol (NTP) is a protocol for synchronizing the clocks of computer systems
over packet-switched, variable-latency data networks. It is designed particularly to resist the effects
of variable latency by using a jitter buffer.
To Next Page
Loading...
