Teleste MCC201 - Page 23

MCC201/MCC201H User manual
4. Remote Configuration • 19
Config Backup and Restore
 Backup
All the device settings can be stored into a backup file for a later use
(such as recovery or setting a spare part unit).
 Restore
Stored configuration can be browsed and restored. The server is rebooted once Config Restore
button is pressed.
Time
 Start Time
Displays the date and time for the last system startup.
 Current Time
Current date and time.
Enter a new date and time and press Set Current Time button to update date and time.
 Time Format
Change the time format. Selectable time formats are as below.
- YYYY/MM/DD hh:mm:ss (Ex. 2010-4-11 18:18:42)
- DD/MM/YYYY hh:mm:ss (Ex.11-4-2010 18:18:42)
- MM/DD/YYYY hh:mm:ss (Ex. 4-11-2010 18:18:42)
 Time Zone
Select the desired time zone for the system.
Depending on the time zone, Daylight Saving Time will work automatically.
A time zone is a region of the earth that has uniform standard time, usually referred to as the local
time. By convention, time zones compute their local time as an offset from UTC (Coordinated
Universal Time). In casual use, GMT (Greenwich Mean Time) can be considered equivalent to UTC.
Local time is UTC plus the current time zone offset for the considered location.